Our belt is high-precision belt manufactured in Japan, it can be equipped to the machine in shorter time and less adjustment. As it hardly causes the trouble while the belt is running, fusing press operation can be continued stably without any stop. Moreover the featured Blue Reinforcement on the both edges of belt brings the toughness and longer life of the belt. Thus the various profits of our belt contributes to cut down the costs.
|Do you have the trouble of belt meandering?||If you replace with made-in-Japan Seamless Belt...||Decrease of belt meandering trouble||All these advantages lead to cutting down your costs|
|Don’t you think it takes too much time to replace the belt?||Replacement completed in shorter time|
|Don’t you think the belt gets torn in a short time?||Hard to tear & Long life|
|Don’t you think the edge of belt gets worn in a short time?||Hard to wear away & Long life|
|Don’t you think it takes too much time to recover from the machine trouble?||Recovery in shorter time|
* Please click the window to read the details
"HASHIMA" Compact Fusing Press Machine
HP-450M/HP-450MS is the latest model of compact type fusing press machine of Japanese manufacturer; HASHIMA Co., Ltd. It’s a definitive edition of compact press with Hashima’s technology and history about 60 years as the machine maker.
|HP-450M06019||Teflon Belt (Upper)|
|HP-450M06018||Teflon Belt (Lower)|
In the Japanese belt production method, the producible size of seamless belt is limited, due to the manufacturing facilities. Therefore Japanese seamless belt for HP-450M/HP-450MS specification has never been produced before. However the high-precision seamless belt manufactured in Japan was always wanted. Its reliability and stability of quality are highly valued in the garment factory. Then the improvement of the production facility was achieved finally, the first Made-in-Japan SEAMLESS belt for HP-450M/HP-450MS has launched at last. After passing the total quality inspection, the best seamless belt is delivered to you.
The edge of belt rapidly gets worn because the limit switch for belt warp prevention always touches the edge. It shorten the belt life.
So we reinforced the belt edge with our unique method. It made possible to extend the belt life. The blue edge is the mark of secured.
HP-450M/MS has the belt warp correction system.
When the belt edge touches the limit switch, the belt warp correction system starts up. As the belt touching is very often, the edge of belt tends to get worn faster.
Compared with common made-in-China belt, the strength of our seamless belt was 20% improved. It has enough toughness to resist the tearing and breakage. It also brings the long life.
Fusing press belt is coated by PTFE(Teflon) resin. And some kind of PTFE (Teflon) resin contains PFOA (Perfluorooctanoic acid). Nowadays it is clear that PFOA is toxic to human and environment. However please DO NOT worry. We have already resolved this problem by replacing with PTFE resin of PFOA-free. Our belt consists from safe materials against human and environment, at the time of disposal also.
The price depends on the quantity and the destination. We will quote you as soon as possible if you give us the inquiry. Please feel free to contact us.
Once the belt broke, fusing press operation would stop for a while. To cope with such emergency, we always keep the enough stock for the quickest delivery.
To deliver the belt to the world as soon as possible, we send the belt by various way like EMS, FedEx and DHL. Shipping charge depends on the destination and order quantity. Please ask us.
Telegraphic Transfer Remittance or Credit Card payment through Paypal are accepted. Cash on Delivery is also acceptable for the domestic customer only.